Retrofit project involving seven AHUs with ECFanGrid: 40% energy savings and double the ventilation capacity

Tuesday 17 November 2026

Airtècnics upgrades seven air handling units at an agri-food facility with 30 EC PlugFan fans, improving energy efficiency, reliability and ventilation capacity.

In industrial food processing facilities, ensuring a constant air supply and precise airflow control is essential to maintaining the operating conditions required in different production areas.

In this project, Airtècnics carried out the upgrade of 7 air handling units (AHUs) supplying air to different rooms in an agri-food facility in Catalonia. The aim was to improve system efficiency, reduce noise and, above all, increase operational reliability in the event of potential failures.

From belt-driven fans to EC fans

The original AHUs operated with belt-driven motors, which were characterised by high energy consumption and noise levels that could be heard in the production rooms.

Furthermore, each unit relied on a single motor, meaning that a failure could interrupt the air supply to the corresponding room.

To overcome these limitations, the 7 conventional motors were replaced with 7 ECFanGrid arrays, comprising a total of 30 EC PlugFan fans.

This configuration distributes the workload across several independent fans and provides redundancy. If one fan fails, the others can increase their speed to compensate for the loss of capacity and maintain airflow as close as possible to the required operating point.

Redundancy and component standardisation

Another important aspect of the project was standardisation. All 30 installed fans are the same model, simplifying spare parts management and maintenance.

This means that the customer can keep a safety stock of fans compatible with all the AHUs, avoiding the need to store different motor models and making maintenance interventions easier in the event of potential failures.

Double the airflow in one of the AHUs

The upgrade also made it possible to significantly increase the facility's ventilation capacity.

In one of the units, the system went from delivering approximately 6,000 m³/h to reaching 12,000 m³/h, doubling the available airflow.

This increased capacity provides greater flexibility to bring new rooms into operation, develop new distribution ductwork or provide additional capacity to adapt to production requirements.

40% energy savings and reduced noise

Replacing the old belt-driven motors with high-efficiency EC fans achieved an approximately 40% reduction in energy consumption compared with the original installation.

The new configuration also significantly reduced noise levels, improving the acoustic conditions throughout the facility.

Upgrading for greater efficiency and reliability

This project demonstrates the potential of ECFanGrid retrofits in industrial facilities where operational continuity, energy efficiency and adaptability are key factors.

By incorporating EC fans, Airtècnics has successfully upgraded all 7 AHUs, reduced their energy consumption, increased ventilation capacity and provided the system with greater redundancy, making use of the existing units and avoiding their complete replacement.

Discover other AHU upgrade projects with ECFanGrid:

Looking to upgrade your air handling units? Discover ECFanGrid and find out how to improve the energy efficiency, reliability and performance of your installations.